led-50w seriesC fixed output and dimmable switch mode led drivers constant current & constant voltage with isolation black magic thermal advantage? plastic housing ordering options: -d: 0-10v & resistance dimmable version comes with an extra two wires +purple/-gray on the output side. -d 0-10v dimming is compatible with most quality 0-10v wall dimmers. see page 3 for additional specifcations. -pd: pwm dimmable version comes with an extra two wires +purple/-gray on the output side. pd pwm version is pwm dimmable via a positive 10% to 100% duty cycle, 200hz to 1khz, 0-10v pulse. see page 4 for additional specifcations. electrical specifcations input voltage range: 100-277 vac nom. (90-305 v min/max) input over-voltage: can endure 320vac for 48 hrs, 350vac for 2 hrs frequency: 50/60 hz nom. (47-63 hz min/max) power factor: >0.90 @ full load, 100v through 277v inrush current: <20.0 amps max @ 230 vac, cold start 25oc input current: 0.50 amps max maximum power: 50w current accuracy: 1% over input line variation load regulation: 3% thd: <_ 20% @ full load leakage current: 400 a typical hold up time: half cycle protection: output over-voltage, output over-current, and output short circuit protection with auto recovery environmental specifcations minimum starting temp: -30oc maximum case temp. 90c (3330ma and 15v, 88c) (4200ma and 12v, 78c) storage temperature: -40oc to +85oc humidity: 5% to 95% cooling: convection vibration frequency: 5 to 55 hz/2g, 30 minutes sound rating: class a mtbf: 474,000 hours at full load and 40oc ambient conditions per mil-217f notice 2 emc: fcc 47cfr part 15 class b compliant constant current - product specifcations model number output current (ma 3%) output voltage range (vdc) max. output power (w) typical effciency led50w-142-c0350- xx 350 47-142 49.7 89% led50w-111-c0450- xx 450 37-111 49.9 89% led50w-072-c0530- xx 530 24-72 38.1 88% led50w-072-c0700- xx 700 24-72 50 88% led50w-060-c0830- xx 830 20-60 49.8 88% led50w-048-c1050- xx 1050 16-48 50 88% led50w-042-c1190- xx 1190 14-42 50 87% led50w-040-c1250- xx 1250 13-40 50 87% led50w-036-c1400- xx 1400 12-36 50 87% led50w-029-c1750- xx 1750 9-29 50 87% led50w-024-c2100- xx 2100 8-24 50 87% led50w-020-c2500- xx 2500 7-20 50 87% LED50W-018-c2800- xx 2800 6-18 50 86% led50w-015-c3330- xx 3330 5-15 49.9 85% led50w-012-c4200- xx 4200 4-12 50 84% constant voltage - product specifcations model number output voltage (vdc 5%) output current range (ma) max. output power (w) typical effciency led50w-012 ? 12 1050-4200 50 84% led50w-015 15 833-3330 49.9 85% LED50W-018 18 700-2800 50 86% led50w-020 20 625-2500 50 87% led50w-024 ? 24 525-2100 50 87% led50w-029 29 438-1750 50 87% led50w-036 36 350-1400 50 87% led50w-040 40 313-1250 50 87% led50w-042 42 298-1190 50 87% led50w-048 48 263-1050 50 88% led50w-060 60 208-830 49.8 88% led50w-072 72 175-700 50 88% led50w-111 111 113-450 49.9 89% led50w-142 142 88-350 49.7 89% class 2: us/canada us only -xx indicates dimming options are available. see options at left. blank = fxed current output e332160 sign components manual ? total power: 50 watts ? input voltage: 100-277 vac nom. ? ul dry & damp location rated ? ip66 ? high power factor ? ul8750 ? ul sign components manual (s.a.m. models) rev 9-11-15 ? indicates s.a.m. specifcations subject to change without notice. note: led drivers are designed and intended to operate led loads only. non-led loading may be outside the specifed design limits of our led drivers, and therefore cannot be covered by any warranty. if you desire to use our led drivers to operate non-led loads please contact us to discuss compatibility. thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com
pg 2 of 4 dimensions - in [mm] ul conditions of acceptability see website for additional information input white (n) black (l) dimming purple (+) gray (-) output red (+) blue (-) wire specs: input leads: 18 awg, rated 600 v, 105c, min. output leads: 18 awg, rated 300 v, 105c, min. dimming leads: 22 awg, rated 300 v, 105c. all wires are stranded with solder dipped ends. tc = 90c max 50% load pf power factor / load 60% 70% 80% 90% 100% 50% load thd thd / load 60% 70% 80% 90% 100% 1 20v a c 2 77v a c 1 20v a c 2 77v a c 0.00 0.10 0.40 0.30 0.20 0.50 0.80 0.70 0.60 0.90 1.00 0% 20% 15% 10% 30% 25% 35% 40% 45% 50% 50 case hotspot temperature (c) lifetime (khrs) lifetime / case temperature (full load @ 120vac) 0 35 75 85 55 65 45 90 105 115 5 15 25 125 55 60 65 70 75 80 85 90 typical efficiency / load 75% 70% 80% 85% 90% 100% 95% normalized output voltage efficiency 33% 58% 45% 60% 92% 83% 100% 90v a c 120v a c 230v a c 2 77v a c typical led50w series note: life calculations are based on reliability with confdence using a 90% confdence level and <5% failure rate. at a confdence level of 90% it is expected that <5% of the parts will fail at the rated life provided. (failure is defned as a driver drifting outside specifcation, rather than fail to operate) thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?
pg 3 of 4 -d option: 0-10vdc and resistance dimming notes: 1. 0-10v dimmable version comes with an extra two wires +purple/-gray on the output side. 2. compatible with most 0-10v dimmers. recommended dimmer is leviton ip710 or equivalent 3. 0-10v dimmable version is not intended to dim below about 5% @ 0v or 10% @ 1.0v 4. 0-10v dimmable version output will be 100% with purple/gray open and minimum with purple/gray shorted. parameters minimum typical maximum source current out of 0-10v purple wire 0 ma - 2 ma absolute voltage range on 0-10v (+) purple wire -2.0 v - +15 v dim (+) purple ip710 wall dimmer led50w-xx-cxxxx-d dim (-) gray (dimmer must be current-sink type control) typical dimming circuit 0v 1v 2v 3v 4v 5v 6v 7v 8v 9v 10v purple-to-gray voltage ( v dc) o u t put c u rre n t / 0 - 1 0 v dc d i mmi ng control voltage 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 100 outpu t cu rr ent % led50w series thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?
pg 4 of 4 -pd option: pwm dimming pwm in pwm positive dimming typical circuit led50w-xx-cxxxx-pd pwm (+) purple pwm (-) gray parameters minimum typical maximum absolute maximum voltage range on pwm input (purple wire) -2.0v 10v +28v input low level voltage range (purple wire) -2.0 0v +7.5v input high level voltage range (purple wire) +9.0 10v 28v sink current into pwm input (purple wire) 0ma - 1.2ma pwm input signal frequency 200hz - 1000hz pwm input signal positive duty cycle 0% 10-90% 100% notes: 1. pwm dimmable version comes with an extra 2 wires +purple/-gray on the output side. 2. below 10% duty cycle proper dimming operation is not assured. unit is not intended to turn off at <10% duty cycle. 3. pwm dimmable version output will be 100% with purple/gray open and minimum with purple/gray shorted. 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% positive duty cycle o u t put c u rre n t / positive duty cycle 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 100 outpu t cu rr ent % led50w series thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?
|
